Welcome to Caregiver Rx
Caregivers resource for medical records and emergency information
Step By Step Instructions
1. Make sure the switch on the MedicTag is to the LEFT when
holding the MedicTag with the attaching hole upright. Moving the switch
to the right locks the unit making it "read only" to prevent accidental
changes to your information.
2. Plug the MedicTag into a USB port. Your system
should recognized that you have plugged in the MedicTag and display a
new icon in the task area at the lower right of your screen. Depending
on your computer system configuration the MedicTag software menu should
be displayed automatically. If it is displayed, go to Step 6. Otherwise
proceed to Step 3.
3. Double click on "My Computer" to show a list of your drives.
(If you do not have a "My Computer" icon on your desktop, click on
"Start" then click "My computer")
4. Double click on the "red cross" icon to access the MedicTag files.
5. Double click the AutoRun.exe icon to start the program.
6. From the menu click on "View Emergency Information".
7. Fill in your information as needed.
8. At the top, right corner of the form, click on the "X" to close the
form. You will be asked if you would like to save the changes. Click
"Yes".
9. You can also save a backup copy of your information to your computer.
Click on "File" and then "Save As", in the dialog box that appears,
navigate to your desktop and then click on "Save".
10. In the menu click on "Exit" or the "X" in the upper right corner to
close.
Removing the MedicTag from your computer depends on your operating
system and hardware.
On most systems that are "Plug and Play" you can simply unplug the
MedicTag.
On others you must must turn off the device by clicking on the device
icon in the task area at the lower right of your screen and follow the
instructions.
Click HERE for Instructions text that you can print.
Do you still have a question? Use the Comments Form to send your questions, comments and suggestions to us.